AиP63A2 design of induction motor cost of induction motor small electric engine repair

Russian standard three-phase asynchronous motor 1) 0.37-315kW; 0.5-430HP 2) 71-355MM base 3) 750 r/min; 1000 r/min; 1500 r/min; 3000 r/min 4) 50Hz 5) 220/380V, 380/660V 6) IM1081; IM2081; IM3081 Russian standard (WG) series motors are fully enclosed, self-fan-cooled cage-type three-phase asynchronous motors. The Russian standard (WG) series motors have improved the protection level (IP54/IP55), improved the insulation level, F-class insulation, according to B-class Assessment, reduced noise (with load noise assessment), the appearance of the motor is novel and beautiful, and the structure is reasonable. Its power level and safety The installation dimensions fully comply with the relevant regulations of GOST R 51689 and IEC60034 standards. Russian standard (WG) series motors have the advantages of energy saving, good performance, high stall torque, low noise, low vibration and high reliability. Features, safe and reliable operation. The installation size conforms to the IEC standard, and it is easy to use and maintain. Russian standard (WG) series motors are suitable for general places that do not contain flammable, explosive or corrosive gases, and can also be used to drive non-flammable, explosive or corrosive gases. Mechanical equipment with special requirements, such as machine tools, pumps, fans, compressors, mixers, transport machinery, agricultural machinery, food machines machinery, etc. HMM series GOST Russian standard series three-phase asynchronous motor Product name: HMM series GOST Russian standard series three-phase asynchronous motor Model: Aluminum motor: 71-132 Iron motor: 80-355 Product Category: Three-phase asynchronous motor Number of motor poles: 2, 4, 6, 8 Rated power: 0.37-315kw Rated voltage: 220V, 230V, 400V, 440V, 660V, 690V… Scope of application: The single-three-phase AC asynchronous motors of our factory (company) are produced in accordance with IEC international standards and relevant domestic and foreign motor professional standards. Widely used in household appliances, fans, pumps, valves, refrigeration equipment, gas compressors, separation machinery, vacuum equipment, lifting machinery, transportation machinery, construction machinery, auto tools, internal combustion engines, animal husbandry machinery, agricultural machinery, woodworking machinery, Construction machinery, machine tool equipment, printing and dyeing machinery, and other power machinery. Power 3kW and below is Y connection; other powers are △ connection. PTC thermistor can be attached, 160MM base and above can be equipped with a grease nipple structure. Structural features -- Power class range from 0.37-315kW --Available from 71-355MM frame size --The overall die-casting structure of the terminal block and the body, with good sealing performance, fully conforms to the IP54/IP55 enclosure protection level standard --Enhanced heat dissipation rib design to make the motor have stronger cooling capacity. Maintain good motor performance in harsh environments -- Dynamic balance correction and low-noise bearings make the motor run more balanced and quiet --Provide F-class insulation grade manufacturing --The pre-set shaft sealing device, when connected with the speed changer and reducer, the sealing performance is reliable and safe --Comply with GOST R 51689 size standard and IM safety structure Uniform standards -- Motor power class and size: GB4826-84; GB4772.2-84; IEC72; GOST R 51689 --Electrical Specifications: GB755-87; IEC34-1; GOST R 51689 --Structure and installation type: GB997-81; IEC34-7; GOST R 51689 --Enclosure protection class: GB4942.1-85; IEC34-5; GOST R 51689 --Cooling method: GB/T1993-93; IEC34-6; GOST R 51689 Enclosure rating The enclosure protection level of the motor indicates the protection capability of the motor in the following two aspects: --The ability to prevent human body from touching live or rotating parts inside the motor and prevent solid foreign objects from entering the inside of the motor -- Ability to prevent water and dust from entering the inside of the motor The motors manufactured by our company are die-casted together with the junction box and the body, and all the shafts and joints of the casing are provided with sealing devices. It can reach the protection level of IP54/IP55 --The motor products are marked according to the following rules: series code + frame number + iron core length specification number + motor pole number Example: WG 90 L - 2 WG - stands for asynchronous motor 90--The second part of the number indicates the height of the center of the base in millimeters (when the base does not have feet, it is the same as when the base has feet) L--The third part of the English letters is the length code of the base (S-short base, M-medium base, L-long base) 2--The number after the horizontal line in the fourth part is the number of poles of the motor, this is a 2-pole motor, the synchronous speed is 3000 r/min (50Hz) Conditions of Use --Ambient temperature: -15℃～40℃ --Altitude: no more than 1000 meters (Meter) --Rated voltage: 380V --Rated frequency: 50Hz --Protection level: IP54, IP55 --Insulation class: F class The Russian standard series three-phase asynchronous motor is in line with the standard, 51689 Gost R Its advantages are good performance, beautiful appearance and light weight. Operating Conditions: ◎Ambient temperature: -15℃≤~≤40℃θ ◎Altitude: no more than 1000 meters. ◎Rated voltage: 220V-720V ◎Rated frequency: 50HZ, 60HZ. ◎Protection level: IP54.IP55 ◎Insulation class: B, F ◎Cooling method: ICO141 --Working mode: S1 (continuous working system) --Relative humidity: ≦90% --Connection method: the power of 3kW and below is the Y connection method; the power of 4kW and above is the △ connection method.